HW'DRIVE2 - 4HWD200

The HW’DRIVE2 has been designed to fulfill different demands with large vehicles, from bus or trolley bus fleets to any type of trams. This model has a lower height and it is open at the top, which makes it suitable for vehicles with an overhead catenary. It includes a pre-soak arch, two rinsing arches, a displaced technical board with a touch screen, soft starters for its four brushes, and speed detection to avoid vehicle impacts.

Watch video

HW’DRIVE2 – DRIVE THRU

Features & Benefits
  • Tilting brushes for trams: top part with pneumatic tilting enabled by cylinders, and bottom part with fixed tilt
  • Rotary joint between brushes for greater stability
  • System for more adaptability to the shape of the vehicles and for greater efficiency with trams
  • Upper vertical brush with minimum tilt to scan tram sides
  • 1/2 and 3/4 brushes spin in opposite directions for a better finish
  • Soft starters for the 8 motors. Tangential tilting prevents brushes from moving into the interconnections between coaches
  • Cylinder system: Brush arms with limit switches
  • Cylinder control by wash zones: Front, side, back.
Description

HW’DRIVE2 – drive through tram wash 4HWD200

This model includes a pre-soak arch, two rinsing arches, a displaced technical board with a touch screen, soft starters for its four brushes, and speed detection to avoid vehicle impacts. Until now it was unachievable to reach spectacular results in drive though tram wash.

Thanks to three pairs of photocells, the system detects if the vehicle reaches the speed limit. If this is the case, the front brushes are automatically opened before the vehicle reaches them, or the machine stops and stays in emergency mode.

optional extras

  • Exit traffic light to indicate rear wash.
  • Wax dosing.
  • Integrated underchassis wash, 20 bar [290Psi].
  • Demineralising unit.
  • Recycling unit.
  • esens® chemical products.

Front & Rear Wash

  • Tilting brushes for trams: top part with pneumatic tilting enabled by cylinders, and bottom part with fixed tilt.
  • Rotary joint between brushes for greater stability.
  • System for more adaptability to the shape of the vehicles and for greater efficiency with trams.

Side Wash

  • Upper vertical brush with minimum tilt to scan tram sides.
  • 1/2 and 3/4 brushes spin in opposite directions for a better finish
  • Soft starters for the 8 motors. Tangential tilting prevents brushes from moving into the interconnections between coaches.
  • Cylinder system: Brush arms with limit switches.
  • Cylinder control by wash zones: Front, side, back.

Touch Screen

  • Control panel with touch screen model KTP400 by Siemens, installed on the door of the electrical cabinet, next to the emergency stop button. The touch screen allows users to carry out all control, configuration and maintenance tasks in a user-friendly way.
  • Possibility of sending emails and optional screen access to control the facility remotely.

Optional Extras

  • Exit traffic light to indicate rear wash.
  • Wax dosing.
  • Integrated under-chassis wash, 20 bar [290Psi].
  • Demineralising unit.
  • Recycling unit.
  • esens® chemical products.

HW’DRIVE2

TBA….

VIEW PROJECT

Recent Projects

Technical Specifications
Washing height up to 4.1 meters

Related products

Close

HW’TRAIN THROUGH